Tile leveling tool for decoration

Incoterm:FOB

Min. Order:1 Piece/Pieces

Product Attributes
Supply Ability & Additional Information
Packaging & Delivery

Product Attributes

Model No.: 019

Place Of Origin: China

Warranty Service: None

After-sales Service: Online Technical Support, Onsite Installation

Application Scenario: Hotel, Villa, Apartment, Office Building, Hospital, School, Mall

Design Style: Modern, Traditional, Contemporary

Varieties Of Tile Accessories: Tile Spacers

Supply Ability & Additional Information

Incoterm: FOB

Packaging & Delivery

Selling Units:

Piece/Pieces



Use of tile leveler



Use of ceramic tile leveler



Tile Leveler T-shaped Wall Tile Positioning Tool



Use of plug-in tile leveler



Usage (T-shaped rotating Tile Leveler)

You no longer have to worry about not being able to use the product after receiving it“

Step 1

Insert the adjusted leveling device in a straight line into the tile gap of 2mm or more“

Step 2

Rotate the T-shaped leveler 90 ° and fix it at the bottom of two ceramic tiles“

Step 3

Tighten the adjustment cover clockwise with your hand or wrench to align the two tiles on the same horizontal line“

Step 4

Wait for 4-6 hours until the tile adhesive and cement have not completely dried before removing the leveling device“

Step 5

Rotate the adjustment cover counterclockwise, and then rotate the T-shaped leveler 90 ° to make it parallel to the tile gap“

Step 6

Easy removal of the leveling device along the gap, reusable, cost-effective“

Tailored spot supply

Tile leveler

Brand new materials, directly supplied by the manufacturer to support customized inventory with sufficient quantity and preferential treatment

Precautions for steel needle wrenches

How to avoid the inability to remove the T-shaped leveler

1. Leave a seam of 1.5mm. You can directly use a leveling tool to leave a seam. If you need to leave a seam of 2mm or more

(Must be used with our store's cross card)

2. When leveling, rotate the steel needle left and right, and be sure to clean the surrounding cement. 3. Do not fill the brick joints with cement, otherwise, if it is taken out late and the cement dries, the steel needle cannot be pulled out. 4. After leveling, be sure to remove the leveling tool 4-6 hours before the cement or tile adhesive is fully dried

5. When taking it out, you can first release the knob to reduce friction resistance with the ceramic tiles