What is the principle of tile leveler?

Tile Leveler is an auxiliary tool used to align and level tiles when they are laid on the ground or walls. It almost eliminates the unevenness caused by tile warping during the curing process, reduces rework, and saves installation time.

How long does it take to remove the tile leveler

About five to five hours, the specific time depends on the ambient temperature and humidity. Generally, when the ambient temperature is high and dry, the curing speed of the adhesive is fast, and it can be removed in about five hours. However, if the ambient temperature is low and very humid, it may take until the next day to remove it. In addition, when removing the tile leveler, it is necessary to remove the side and back templates in order, then remove the combined large template, and finally the supporting and connecting components.

How to remove the tile leveler

To dismantle according to the design specifications of the panel, it is best to dismantle from top to bottom, and during dismantling, do not use a hammer or stick to pry it hard. The steps are as follows:

Remove the side formwork, and then proceed to remove the load-bearing formwork at the rear

If it is a combination of large templates, they need to be dismantled as a whole.

The supporting and connecting components should be dismantled along with the components, and the template should be dismantled along with the blocks and transferred,

After dismantling, the template and accessories should be classified and placed together, and the accessories should be placed in the toolbox

Which type of tile leveler is good to choose

Tile leveler can be a herringbone tile leveler, cross shaped tile leveler, or T-shaped tile leveler

Herringbone tile leveler: Herringbone tile leveler is commonly used to level the ground, with two angles that can be used to lay tiles of different sizes.

Cross shaped tile leveler: The cross shaped tile leveler is also a tool used to level the ground, with four angles that can be used to lay tiles of different sizes.

T-shaped tile leveler: The T-shaped tile leveler is suitable for leveling walls and has three angles, making it easy to lay tiles.

September 09, 2024