How to remove the tile leveler?

To dismantle according to the design specifications of the panel, it is best to dismantle from top to bottom, and during dismantling, do not use a hammer or stick to pry it hard. The steps are as follows:

1. Remove the side formwork, and then proceed to remove the load-bearing formwork at the rear.

2. If it is a combination of large templates, they need to be dismantled as a whole.

3. The supporting and connecting components should be dismantled along with the components, and the template should be dismantled along with the blocks and transferred.

 

When laying tiles, many friends will use a Tile Leveler to level them, which is more convenient to operate. So, how to remove the tile leveler after laying?

 

1、 How to remove the tile leveler

 

To dismantle according to the design specifications of the panel, it is best to dismantle from top to bottom, and when dismantling, do not use a hammer or stick to pry it hard. The steps are as follows: 1. Remove the side formwork, and then remove the load-bearing formwork at the back. 2. If it is a combination of large templates, they need to be dismantled as a whole. 3. The supporting and connecting components should be dismantled along with the components, and the template should be dismantled along with the blocks and transferred. 4. After dismantling, the templates and accessories should be classified and placed together, and the attachments should be placed in the toolbox.

 

 

2、 What are the precautions when laying tiles

 

1. Before tiling, be sure to polish the wall flat to avoid affecting the effect of the tiling. If the area is relatively large, it can be directly polished with a grinder, which is more convenient to operate. If the area is relatively small, it can also be manually polished with sandpaper.

2. Ceramic tiles should be of good quality so that there is no need to worry about cracking when laying. Before use, soak the tiles in water for a while to absorb enough moisture and prevent them from drying out later.

 

3. You can apply cement mortar on the wall or use glue. When choosing, you can consider the actual situation. No matter which bonding material is chosen, remember to identify the big brand, otherwise the tiles may fall off after being laid.

4. Friends who don't know how to lay tiles can find professional staff to help, instead of doing it themselves.